k750 to w800

salut.. as incerca sa fac asta acasa dar nu prea am gasit documentatie pe net mai pe intelesul meu... ar putea cineva sa ma ajute cu sfaturi... v-as ramane recunoscator... tin sa precizez k in domeniul asta sunt abia la inceput de tot... si nu am prea mare idee de ce trebuie sa fac

Nu prea ai precizat ce vrei sa faci, sa schimbi softul/firmware-ul sau ce?

Mesaj iniţiat de Ratza

Nu prea ai precizat ce vrei sa faci, sa schimbi softul/firmware-ul sau ce?

salut MM. pai sa fiu sincer... ma mai ganadesc daca sa downgradez firmwareu de k750(R1DB001 kre e de toata jena) sau sa ii pun firmware de w800... mai bine zis vreau sa invatz sa flashuiesc telul asta... daca ma intelegi...

Mesaj iniţiat de zen

salut MM. pai sa fiu sincer... ma mai ganadesc daca sa downgradez firmwareu de k750(R1DB001 kre e de toata jena) sau sa ii pun firmware de w800... mai bine zis vreau sa invatz sa flashuiesc telul asta... daca ma intelegi...

trebuie resoftat...vezi ca e un thread pe aici pe undeva unde explica cineva ce tre sa faci pas cu pas

stiu k trebuie resoftat... eu as fi vrut un tutuorial de-a amanuntu, daca exista, ma gandeam k cine ar putea pune asa ceva aci, la fel cum am pus si eu programele si ce am mai pus eu p'aci

dude, linkurile alea nu mai merg demult, stiam si eu de threadul ala

deci... am luat un tutorial de pe topsony.com... pe kre l-am si pus in practica... merge, e super usor, si dak urmezi pasii ca acolo e 100% safe( doar sa nu se ia curentu )

Flashing K750 to W800

Disclaimer : This process is 100% safe, but I am not to be held responsible if anything at all happens. Even something happens to the phone do not worry u can always flash back if u have the right firmware.

W800 has types CID36 only, but K750 is available in two CID36 & CID49
Remove SIM and memory card for the entire procedure.
Watch keenly on the messages shown in the software window (XS++).
Do not let your phone turn ON at any point of time. Flashing takes place only when phone is switched OFF. U will see ur CID urself be coooooool.


Before u start
1. A phone needs two things FLASH and MAIN. These are the operating system for ur phone. The FLASH file will be something like w800_R1BC002_FS_EMEA6.bin and MAIN something like W800_R1BC002_MAIN_EU_EMEA.bin.

2. EMEA indicates the software type and the above supports for India tested by myself. For others u will have to download others like (W800_R1BC002_MAIN_EU_EMEA_RED49 & W800_R1BC002_FS_EMEA2)

3. W800 stands for the mobile model for which the software is and R1BC002 is the type of FIRMWARE (Something like software version).

4. Full package can be found at

Rapidshare

OR

Sendspace

Unpack the rar file using WinRAR.

The package includes:
XS++: This program is used to flash you phone's firmware. This also lets you check your CID number.

Gslide: This program converts W800 CID36 firmware to CID49, to make the firmware compatible to K750 CID49 phones. CID36 users need not use this.

W800 Firmware: Your Main and File System files. Your W800's operating system files.

USB Flash Driver: The driver you need to enable your phone for flashing through USB cable. These drivers are NOT (I repeat NOT) the same ones you get on K750 PC suite CD

Flashing should be done in this order
1) Flash FS
2) Customize FS
3) Flash MAIN
Because in XS++ the flashing has to be done in following order only because of a bug.

STEP1: Installing USB Flash Driver.

Turn off your phone. Remove SIM and memory card, and re-insert battery. Do not turn ON.Inside K750toW800 folder, goto XS++ folder and open the program. now click START. While pressing and holding the "c" button on your phone's keypad, insert USB cable. Windows will detect a new hardware and "Install new hardware" wizard pops up. Release the "c" button. In the wizard, click "no", not at this time, and next. Choose to install from a specified location and click next. Under search for the best drivers to install, check include this location in the search. Under browse, choose the path to the unpacked folder you downloaded and select the folder USB Flash Driver. Now click next and let the windows install the driver. After installing the driver, close XS++ and disconnect phone and turn it off in case it has switched on. Remove battery for 2 seconds and re-insert it (to refresh your phone). (Removing and re-inserting is usually required once u disconnect in any step)
Now your phone is ready to be flashed.

CHECKING CID NUMBER

Again open XS++, click START, and insert cable while pressing "c" the same way as before. Your fone gets detected and on the left side of the screen, you get the detailed info of your phone including the EROM CID number.

If you have CID 36, then goto STEP3. Do not close XS++ or
unplug your fone.

STEP2:

For CID49: you know you have a CID49. So the CID36 firmware(which is downloaded) has to be converted to CID49.
A. Open Gslide. for flashfile, click "..." and select the file named "W800_R1BC002_MAIN_EU_EMEA.bin" inside the W800 Firmware folder. In "output" type in the path C:\MAINFLASH.bin. Now click "Process".

B. After sliding process is completed, again click "..." for flashfile and select file "W800_R1BC002_FS_EMEA6.bin" inside the same folder. Under "output" type in C:\FSFLASH.bin and hit process. Close the whole program after sliding completes.

Now there will be 2 files in C:\ drive just created using Gslide. MAINFLASH.bin and FSFLASH.bin

STEP3: Flashing FS.

For CID36: Your phone is already detected by XS++. Under Select Firmware, check Flash File System, and then click "..." now select the file "W800_R1BC002_FS_EMEA6.bin" inside W800 Firmware folder. Hit flash, the flashing process is now initiated. After completion of 291 blocks, it will say either done, flashing or hang at "finishing flash". Don't worry about it. Close the program and unplug phone. Again take-out and reinsert battery to refresh. Goto STEP4.

For CID49: Inside XS++, Under Select Firmware, check Flash File System, and then click "..." , now select the file "FSFLASH.bin" in the C:\ drive which we generated from Gslide. Hit flash to start flashing process. After completion of 291 blocks, it will say either done, flashing or hang at "finishing flash". Don't worry about it. Close the program and unplug phone. Again take-out and reinsert battery to refresh.

STEP4: Customizing FS.

Common for CID36 and CID49: Again open XS++ and connect the phone same way as we did before. Now check Customize File System and then select phone model "W800", select CDA and region "EMEA_6(CDA102430/6)". Hit Flash. It will ask you whether you want to use "breakin" or "brute-force". Click "yes" for breakin and strictly follow instructions on the left side of the screen. It will ask you to connect and re-connect phone 2-3 times by press and hold "c" method. Do not panic at any point here, just follow the instructions carefully on the left. At the point when it says "FS activation", wait for 3 minutes. After completion it asks again to connect the phone but it wont get connected so close XS++ and unplug fone. Refresh by re-inserting battery.

STEP5: Flashing MAIN.

For CID36: Open XS++ and again connect your phone the same way. Under Select Firmware, check Flash Main, and then click "..." , now select the file "W800_R1BC002_MAIN_EU_EMEA.bin" inside W800 Firmware folder. Hit flash, the flashing process is now initiated. After completion of 291 blocks, it will say either done, flashing or hang at "finishing flash". Unplug your phone and close XS++.

For CID49: Open XS++ and again connect your phone the same way. Under Select Firmware, check Flash Main, and then click "..." , now select the file "MAINFLASH.bin" in the C:\ drive which we generated from Gslide. Hit flash, the flashing process is now initiated. After completion of 291 blocks, it will say either done, flashing or hang at "finishing flash" Unplug your phone and close XS++.

STEP6:

Now, insert your SIM and memory card and turn on the phone, wait for sometime as the phone takes time loading from a brand new firmware. It will say phone staring don't panic it will take some time as the new software has to be initiated.

Daca aveti intrebari sau nelamuriri va rog sa postati aici

Mesaj iniţiat de zen

cine vrea sa isi tuneze cu adevarat telefonul (w800, k750, w810).. sa zica aici, voi posta un tutorial in romana, care va fi ff usor de inteles... doar sa cereti

ceva pentru un samsung z300 nu gasesti?

Mesaj iniţiat de Ratza

ceva pentru un samsung z300 nu gasesti?

o sa ma interesez asa ca pt un preten...

Mesaj iniţiat de gaby85

pai cerem baga mare

ok mane o sa fac unu numa pt k750/w800/w810... dar nu acum... imi lasati o zi/doua de gandire

se poate si debloca... vin mai incolo cu un link...

/edit later: sry, nu se poate decoda decat cu bani...

vreo personalizare si imbunatatire a unui SE k310i gasesti, ms

Mesaj iniţiat de d3ni

vreo personalizare si imbunatatire a unui SE k310i gasesti, ms

Poate gasesti daca cauti -> www.se-nse.net

ceva pt SE v630i daca gasesti...

Mesaj iniţiat de coolzero_alex22

Poate gasesti daca cauti -> www.se-nse.net

Word!